Exhibit Design Search / Trade Show and Event Tips / Design, Lighting, and Graphics Tips /

7 Common Graphic Design Errors (Q&A)

Time to Make What's Wrong Right

Question: Our graphics need a complete overhaul, as they're an ineffective, jumbled mess. However, I'm not 100-percent certain exactly where they went wrong. So how do I create new exhibit graphics without making the same mistakes again?

Answer: Many exhibitors are in the same boat. They know their graphics aren't serving them well, yet they can't quite put their finger on where they've gone dreadfully wrong. To help ensure your next set of graphics don't end up looking like the first, here are some of the most common errors exhibitors make when it comes to graphic design and production.

1. Creating an Oversized Brochure. The single biggest exhibit-graphic mistake is trying to turn a pamphlet into a graphic panel. Far too often exhibitors take a perfectly good image and cover it with paragraphs of text. However, attendees don't stop to read text-heavy graphics; in fact, this type of visual clutter often prevents them from stopping at all.

Instead, graphics should communicate an idea, a message, or maybe a couple of key points in a clear, concise manner. So if you must provide details, do so in your printed or electronic collateral, and ensure that all graphic content can be digested in 10 seconds or less. In short, what’s the problem you solve and what makes your solution unique.

2. Stretching Resolution. Many exhibitors try to "make do" with low-cost, low-resolution images, and they end up paying for it later with washed out or blurry images. Spending a little extra to secure high-resolution stock images or professional photography will make a huge difference in graphic quality.

3. Failing to Factor in Exhibit Components. Typically exhibitors view and approve graphic files as individual elements. Instead, always ask designers to render your graphics into an electronic version of the entire exhibit display. This way, you'll have a much better understanding of whether their size and positioning will make the impression you intended.

For example, exhibit components, shelves, monitors, etc. can block or partially obstruct the view of key graphics. Or perhaps that 8-foot panel you created is getting lost in your 50-by-50-foot exhibit. Seeing the graphics rendered into the design will not only prevent obstructions but will also give you a much better idea of the impact your graphics will have in the space.

4. Designing in a Vacuum. Like a clothing line at New York Fashion Week, your exhibit graphics should have a cohesive story, as opposed to functioning as independent elements without connection. For example, you might have four product-centric panels at the ground level, two large billboard graphics above your exhibit, and maybe eight kiosk-based panels. While they may serve different purposes, they must all communicate in a similar fashion and have something to visually and mentally link them together. This connection could be created via images, colors, messaging, positioning, scale, etc. But without some kind of connection, your graphics will fail to work together and will instead confuse your message — and the attendees.

5. Indulging a Font Fetish. One or two fonts are plenty. I promise. Any more than that, and you've got an identity crisis on your hands. That's because legibility is key with any graphic design, but it's especially critical with graphics viewed from a distance. As such you want to use familiar, highly legible fonts to create a clean, consistent look across all graphics, which will ultimately enable attendees to quickly and effectively consume your messages. And as a general rule opt for common fonts, such as Helvetica or Garamond, and avoid superfluous fonts with names like Peace Mustache and Sweet Cheeks. (Yes, these actually exist.)

6. Thinking Small. Once in a while you need a graphic to accompany a kiosk or a tiny product display. But more often than not, the purpose of your graphics is to lure in attendees and communicate a single message about your company, products, or brand. As such, you're better off with a handful of large, impressive graphics than shipping crates full of small graphics meant to be view from 2 feet away.

If you need to communicate at the 2-foot distance, simple poster board, iPad imagery, or even printed literature usually provide a better bang for your buck. And remember, anything positioned at eye level or below will likely be fully or partially blocked by attendees in the aisle or your exhibit. Thus, the higher and larger your graphics, the more chance they have of being seen in their entirety.

7. Forgoing Professionals. You can destroy your exhibit's aesthetic quality in a heartbeat if you fill you space with lackluster, unprofessional graphics. So always hire a professional graphic designer with experience in trade show work. He or she should know how to obtain quality files, format them, design your graphics, and hit your deadlines with ease. If you don't know how to create raster versus vector files, you can't expound upon the nuances of continuous tone, and you think a graphic bleed sounds like a bloody mess, you role in the graphic-design process should merely be to approve or disapprove of finished, professional designs.

While these missteps are just the tip of the iceberg, they're among the most common mistakes exhibitors make when it comes to graphic design and production. By simply avoiding these pitfalls, you'll be well on your way to creating an effective and eye-catching graphic system for your next exhibit.

For more information about trade show or event marketing, give us a call or Contact Us. We welcome the opportunity to assist you with your next event.
 

Article Author:

Mel White
Classic Exhibits Inc.

Add designs and photos to your personal gallery simply by clicking on the +My Gallery links

Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.

Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.

  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Shorter lead times may be available based on schedule openings in Customer Service and Production. Rush charges may apply.
  • Standard lead times do not apply to orders of multiple quantities.
  • Please check for product availability on ALL RENTAL exhibits.
Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.
Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.